This example generates a pattern (for example a sine wave) and sends it via FIFO to channel 1 of the analog outputs of the ZSOM-Control.
Project: ZSOM-Control_DAC_waveform.lvproj. In LabVIEW, open Help → Find Examples and search for “ZSOM”.
| Control | Function |
|---|---|
| type | Shape of the pattern, for example sine or square |
| Frequency | Frequency of the pattern in Hz (default 1000) |
| Amplitude | Amplitude in V (default 4) |
| Offset | Offset in V (default 0) |
| Indicator | Function |
|---|---|
| generated pattern | The pattern that is sent to the DAC |
| acheivable frequency | The frequency that can be reached with the generated pattern |
| sampling periode [us] | Time between two samples in µs |
| update DAC | Lights up while a new pattern is transferred to the FPGA |
DAC_waveform_RT_main.vi): Loads and starts the FPGA. When a setting changes, the VI DAC wave generator.vi calculates a new pattern and the RT writes it to the FIFO of DAC channel 1.DAC_waveform_FPGA_main.vi): Reads the pattern from the FIFO into a memory block and outputs one value after the other at the calculated sampling period. All channels are updated simultaneously.DAC wave generator.vi): Calculates the pattern from type, frequency, amplitude and offset. The pattern has at most 1024 samples and at least 10 samples, the minimum sampling interval is 5 µs. The output is limited to ±10 V.

RT code: front panel (SubVI DAC wave generator.vi)