ZSOM-Mini

The ZSOM-Mini is an off-the-shelf hardware module from NI Embedded-Specialty Alliance Member Schmid Elektronik, integrating the NI System-on-Module (SOM) sbRIO9651 on a tiny carrier board. It is designed for miniaturized measurement, control and monitoring applications and can be fully programmed with LabVIEW RT and LabVIEW FPGA. The board is about the size of the SOM itself and provides all the features on two rows of screw terminals.

To activate specific board regions and functionalities, some GPIOs have to be set accordignly.

data sheet

Mechanical drawings

6x analog in, 16 bit, ±5V or ±10V, 450kHz simultaneous, 4th order antialiasing with fg=200kHz.

10 x general purpose high speed I/O (DIO), configurable as digital input or output, 3.3V or 5V operation, speed in the MHz range allows to integrate high performance SPI devices. The SDK features VIs for the integration of digital busses like I2C and SPI
4x rugged digital input (DIN), 3-30V, OVP (DINX)
4x rugged open collector output (DOUT),max current: 200mA.

1x USB Host/TypeA
1x USB device/TypeC for TCP IP connection
1x CAN
1x SD-Card (available from hardware Version V1.1ff)
1x RS232
1x RS422/RS485
1x generic extension connector with possibility to add mPCIe board that adds WIFI, 4G and GPS to the system