ZSOM Power Supply

The ZSOM Power Supply is a 12 V plug-in power supply with a pluggable screw terminal connector that fits directly into the power connector of ZSOM-Control and ZSOM-Mini-Standard. It is part of the ZSOM-Control Starter Kit and can also be ordered separately.

Parameter Value
Input voltage 100–240 V AC, 50/60 Hz
Mains plug Type C (Europlug)
Output voltage 12 V DC
Output current max. 1.5 A
Output power max. 18 W
Cable length approx. 1.2 m
Connector 3-pin pluggable terminal block, 3.50 mm pitch, female, with screw terminals (Würth WR-TBL 691361100003)
Wire cross section (connector) 0.13–1.31 mm² (AWG 26–16)
Rated current (connector) 10 A

The plug matches the power connector J3 on the ZSOM-Control (see pinout) and the power input of the ZSOM-Mini.

Pin Signal
1 GND
2 +12 V
3 not connected
  • The 12 V output is well within the input range of both boards (9–28 V).
  • 18 W covers the typical power consumption of the ZSOM-Control with display (about 8.5 W), which leaves headroom for the switchable 5 V / 3.3 V outputs and peripherals such as USB devices or a 4G modem.
  • If the application draws more power, or a different supply voltage is required, any DC supply within 9–28 V that delivers at least 1 A can be used. The mating connector can be ordered separately as A013719.
  • Only plug in or unplug the power supply connector when the mains side is disconnected.

This is a list of accessories and plug-ins that can be combined with carrier boards and add-ons

Article Number Name Version Notes Product Status
A027237 ZSOM-Wi-Fi-TPE-N150USB USB Wi-Fi Dongle available
A020667 ZSOM-Power-Supply V1.0 12V Power supply available
A012118 ZSOM-4G-GPS-ME909u-521 4G cell phone modem with GNSS functionality in development
TBD ZSOM-GPS-RTK-ZED-F9P V1.1 GPS RTK module in development
A021892 ZSOM-GPS-RTK-ZED-F9R V1.1 GPS RTK module with dead reckoning in development
  • Last modified: 8 weeks ago