Ethernet
Use a CAT5e or better Ethernet cable (CAT5e is the minimum for Gigabit Ethernet) to connect to your local Network or directly to your Computer. When you power up the device, it attempts to initiate a DHCP network connection (standard configuration). If the device cannot initiate a DHCP connection (eg if you connect to your PC directly), it connects to the network with a link-local IP address with the form 169.254.x.x.
Boards without an Ethernet connector (e.g. ZSOM-Mini) can be reached via Ethernet over USB.
To reset the Network settings, follow the instructions on the Reset page
