Kernel update instructions
The modified kernel is available from GitHub: Release lwb5p/20.5-0.1
The instructions below perform a download directly onto the target.
Preparation
Before installing the kernel make sure the target has installed the following software.
- Firmware sbRIO-9651_7.0.0.cfg or newer
- NI CompactRIO 20.5
These components can be installed with NI MAX.
The Target must be connected to a network with internet access. The USB LAN connection is not bridged to the PCs internet connection. The Ethernet port must be used. If a target has no Ethernet port (e.g. ZSOM-Mini), the sbRIO-9651 module can temporarily be plugged onto a ZSOM-Control for this operation.
The following steps have to be completed to install the kernel on a target:
Open a SSH connection to the target.
See Knowledge base article " Accessing the Shell in NI Linux Real-Time Devices".
Hint: The default login is admin and the password is empty (no password).
Set date and time
You can use NI MAX or the shell you connected to in the previous step. The following steps may fail if the date is incorrect.
Shell command to set date and time:
date -s "2020-06-25 12:00"
Update package manager
opkg update opkg upgrade
Download Package
One of the following based on wich driver you intend to use:
Laird LWB5+ module for Linux RT System Image 20.5
wget https://github.com/schmid-elektronik/ni-linux-packer/releases/download/lwb5p-0.1/ni-linux-kernel-lwb5p_0.1-r01.ipk
or
USB stick (ath9k_htc driver) for CompactRIO 19.5 or newer
get https://github.com/schmid-elektronik/ni-linux-packer/releases/download/ath%2F20.5-0.1/kernel-module-ath9k_htc-4.14.146-rt67-cg-8.5.0f0-xilinx-zynq-32_4.14+git40+27f65d4c99-r0.19.ipk
Install new kernel
One of the following based on wich driver you intend to use:
Laird LWB5+ module for Linux RT System Image 20.5
opkg install ./ni-linux-kernel-lwb5p_0.1-r01.ipk
or
USB stick (ath9k_htc driver) for CompactRIO 19.5 or newer
opkg install ./kernel-module-ath9k_htc-4.14.146-rt67-cg-8.5.0f0-xilinx-zynq-32_4.14+git40+27f65d4c99-r0.19.ipk
Do this for all *.ipk files that you have downloaded in the previous step.
This might take some minutes, as proprietary NI kernel modules are rebuilt for some installations.
Restart the target
reboot