RS232 interface

The ZSOM-Control and the ZSOM-Mini each provide one RS232 interface. It is based on a serial port of the sbRIO-9651 and an RS232 transceiver.

ZSOM-Control ZSOM-Mini
Number of interfaces 1 1
Signals TX, RX, RTS, CTS TX, RX
Hardware handshake yes (RTS/CTS) no
Baud rate up to 230400 up to 230400
ESD protection yes yes
Terminals TX 62, RX 61, RTS 59, CTS 60, GND 58/63 (pinout) TX 26, RX 27, GND 25/28 (pinout)
  • Connect TX of the ZSOM to RX of the device and RX of the ZSOM to TX of the device; always connect GND.
  • ZSOM-Control: connect RTS/CTS crosswise as well if the device uses hardware handshake.
  • Keep the cables short; RS232 is intended for distances of a few meters. For longer distances use RS422/RS485.

The interface is a serial port of NI Linux Real-Time and is used from RT code with the NI-VISA serial functions (VISA Configure Serial Port, VISA Write, VISA Read).

See the examples included in the SDK:

  • Last modified: 4 weeks ago